Category Archive » Rebuildables

454 Big Block RDA Clone

454 Big Block RDA Clone

454 Big Block RDA Clone

Can You Say Performance?

The 454 Big Block is a wonderful RDA with some serious performance. As you can see, the 454 Big Block RDA Clone is now available for those of us on a serious budget.

On sale for $10.61

There are several things you can say about the 454 Big Block – you have to earn using this thing – its not easy to build on the first few times you try and coil this bad boy. This is no different than the original.

The deck is made up of one single positive post (double drilled) and 4 screws in the deck. The physical deck acts as your negative connection. When you build this thing you have to put the positive lead into the center post. The negative lead then goes under a retaining ring and you screw all of this down to the deck. It can be tricky the first few times you do this, but with a little practice you’ll get it down to where you’re not wrecking your coils.

So is this worth the hassle? Definitely! This thing is one of the best performers to come out this year. It performs right up there with the Plume Veil in my opinion. If you want serious performance for a low price, the 454 Big Block RDA clone is the way to go – no question.

454 Big Block RDA Clone Airflow

The air flow on the Big Block is particularly nice. You can run this in single, dual and quad coil configurations. Its outstanding. You just watch how the holes are lined up for whatever configuration you’re running and this beast brings the airflow. No question. You can adjust the airflow holes as well to vary the amount of pull you’re getting from this device.

Also cool is the included drip tip. The base of the drip tip features side airflow holes – this prevents spit back from the vapor as well as creating more of a vortex as the vapor is leaving the RDA.

And now that it has been cloned, you can now enjoy the 454 Big Block at a fraction of the price of the original.

On sale for $10.61

Plume Veil RDA Clone

Luxury Performance From A Clone

Plume Veil RDA Clone

Plume Veil RDA Clone

The Plume Veil RDA is one of the more innovative devices on the market right now. Unfortunately, its both pricey and hard to find as most dealers are out of stock at the moment.

But the good news is there is a really nice Plume Veil RDA Clone out on the market so you too can enjoy one of the best RDA designs available.

Available in:

Stainless Steel for $10.04
Black for $10.70
Copper for $14.89

Plume Veil RDA Clone – How does it stack up?

The Plume Veil RDA Clone is different than a lot of designs out there. This clone has 3 sets of air flow holes. You have the standard, slot control slide adjustment on the sides of the top cap where the coils sit. A second, non-adjustable set of air holes are on either side of the top cap that lead to channels in the deck. The air here is brought up from the posts on the deck – very nice. And finally there are 2 holes on the top of the top-cap that are adjustable by turning the Delrin ring to open and close them. This is really nice as they create a vacuum to shape the airflow as it brings the vapor to the drip tip.

The Plume Veil RDA Clone also features a gold plated deck and double terminal center post that turns to accommodate various builds you might want to try on this thing.

The Plume Veil is very useful for both single coil and quad coil builds.

It comes in several finishes that the original does not which is quite nice as well. You can get the standard Stainless Steel, Black Top-Cap or Copper Editions.

I actually really love this about clones – you end up getting different finish options to match up whatever mod you are using.

So if you can find and and afford the original, go for it! For the rest of us there is a choice of clones.

Available in:

Stainless Steel for $10.04
Black for $10.70
Copper for $14.89

Plume Veil RDA Clone In Black

Plume Veil RDA Clone In Black

Plume Veil RDA Clone In Copper

Plume Veil RDA Clone In Copper

Quasar RDA Clone

Quasar RDA Clone

In Stock:
Brushed Stainless Steel for $10.10
Brass for $8.37
Copper for $9.45

The Quasar is one of the hot boutique rebuildable atomizers on the market. It runs over $100 and that’s if you can find it in stock. Luckily, there are several Quasar RDA clone models already out for a fraction of the cost of the original. And they look pretty good!

What’s amazing is that the latest Quasar RDA is the copper model. There was a machine malfunction at Cosmic Innovations and the genuine Quasar RDA has been delayed another month. Oddly enough – the clone is readily available and literally less than 1/10th the cost of the one everyone has pre-ordered. So you think you want one? You can get it now.

Quasar RDA Design

The Quasar is a standard 3 post rebuildable atomizer. The awesome thing about this design is the slot-type airflow control and conical top cap design. You have 3 choices of sleeve material on this RDA. It comes available in brass, brushed stainless steel and copper.

This RBA looks amazingly sharp. Its well reviewed as one of the better RDA’s to come out so far this year. The clone is a 1:1 so you can’t beat the price.

If you’re a vapor who’s budget conscious – these clones are just what you’re looking for!

In Stock:
Brushed Stainless Steel for $10.10
Brass for $8.37
Copper for $9.45